Datis ARD 1.2
- Mount the UPS on the wall using 4 screw plates.
Remove the UPS cover by unscrewing the screws on the door. - Disconnect the Phoenix socket on the control panel and connect the 8 ter- minals of the UPS socket to the control panel based on the UPS wiring dia- gram.
Please note that S2 and S must be same phases, unless control panel fault UPS–5 S2<–>S will be displayed.
- Connect the LAN cable (available inside UPS) to UPS socket in LIGHT controller inside control panel.
- Turn ON the control panel after making sure about connections. Choose “Main Setting” group in “All Parameters” menu and “Enable” the “Rescue” parameter.
Light Controller: All Parameters / Main Settings/ Rescue = Enable
- Connect BAT miniature fuse in UPS and close the cover of UPS with screws.
- If the UPS works properly, the UPS LED which is located on top of LAN connection flashes
